Loading... Please wait...
  • Image 1

Variable Controller

6.00 LBS
Calculated at checkout

Product Description



  • Controls Injection Pressure as a function of Boost
  • Fully Integrated Boost Sensor 0 to 30 psi
  • 0-5 Volt Boost Signal Output
  • 1.5% Maximum Error over 0 Degrees to 85 Degrees Celcius
  • Potted Electronics and Rugged Design for Under Hood Applications
  • Easy Adjustment and Setup
  • Electronic Resetable Fuse and Transient Voltage Suppression to Protect Controller.

The Electronic Variable Controller from Snow Performance represents the latest technology in Water/Methanol system control. The controller is designed to increase injection pressure over a user adjustable range and quickly shut off when boost pressure drops to prevent misfire. No special MAP or MAF is required. The controller has a .2 to 5 volt output signal (denotes 2.9 to 36.3 manifold boost psi) that can be used for an input to other applications. The small rugged design and easy setup makes the EVC the logical choice for automotive/offroad enthusiast.

An external hose barb is provided to connect the controller to manifold pressure. The user then sets two dials that are located under the lid of the controller. The first dial tells the controller what pressure to turn on and off. The second dial tells the controller the pressure where maximum injection is required. Once the two dials are set, the controller will linearly increase/decrease the injection pressure over the set range. Start pressure is adjustable from .5 to 8psi. The Full pressure is adjustable from 2 to 25psi. Note that if the Full Psi dial is set below the Start Psi setting, full injection pressure will occur once the Start boost psi is reached.

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Find Similar Products by Category