Loading... Please wait...
  •  PowerMAX V2 - SparkMAX 25 Volt/31 Volt Coil On Plug Ignition System Booster (40 amp fuse)

 Double the output of your ignition system.

 PowerMAX Version 2 includes a new case, additional output & more features!

 Simple installation - PowerMAX splices into the existing +12V DC wire that feeds your ignition coils.

 Compatible with all ignition coils.

 Avoid spark blow out, widen your spark plug gap and smooth your engine today!
  • PowerMAX Version 2 with the six position control cable connected.
  • Six Wire Control Cable • 22 feet in length

When you connect the Grey Wire to the Black wire the unit is enabled and will boost the output voltage.
Or if you connect the Grey Wire to ground the unit is enabled and will boost the output voltage.

Also: The red wire is used to monitor an external 0-5v sensor (black single connector) and if this voltage is above the value set by the pot the unit is enabled and will boost the output voltage.
  • PowerMAX V2 - Three main connection wires.

Red • +12V Input (Fused 40 Amps)
Black • Ground
White • Boosted Output
  • Far Left -> Six Wire Control Connector

Dip Switches -> Used to program the device

Two Adjustment POT's (Used to set the device output and 0-5v trigger point)

Green LED (Far Right) • When the LED is blinking the unit is BOOSTING the voltage output
  • Included - High Quality Hobbs Switch with screw terminals (User Adjustable 3-7psi)

Preset @ 5psi

Turn Clockwise to INCREASE the pressure setting.
  • Installation kit for PowerMAX V2 • Single Input/Output • Universal Splice In
  • PowerMAX V2 - 40 AMP Fuse & 10 gauge automotive rated wiring
  • Optional: Remote Mounted Voltage Control Knob  (Approximately 1" x 1" x 1")

Part Number: PM-2999

Over-Rides and adjusts the output voltage when the device is boosting voltage.
  • Optional: Remote Mounted Voltage Control Knob  (Approximately 1" x 1" x 1")

Part Number: PM-2999

Over-Rides and adjusts the output voltage when the device is boosting voltage.
  • Optional: Remote Mounted Voltage Control Knob  (Approximately 1" x 1" x 1")

Part Number: PM-2999

Over-Rides and adjusts the output voltage when the device is boosting voltage.

PowerMAX V2 • SparkMAX • Universal Splice In • Ignition Booster

$419.00
SKU:
P2100
Brand:
JMS
Weight:
5.00 LBS
Availability:
Usually ships within one business day.
Shipping:
Calculated at checkout

Choose Your Options

Quantity:

Product Description

 
PowerMAX v2 • SparkMAX 25V or 31V • Universal Splice-In Ignition Booster
 

Double the output of your ignition system.

Eliminate spark-blow-out and run a wider gap on your spark-plug.

Use PowerMAX v2 to quickly and easily increase the output of your ignition system!


PowerMAX Version 2 upgrades include: New Case, Higher Output & More Features!!


PM-2100 boosts & regulates the igntion voltage to 14.4v all of the time. 


Designed to be activated at Wide Open Throttle. 

 

 
  • Simple installation: PowerMAX splices into your existing ignition coil +12V DC feed wire.
  • Compatible with all 12V or 16V battery systems
  • Works on all Coil on Plug igntion systems.
  • Eliminate Spark-Blow-Out
  • Enjoy smooth acceleration and increased economy.
  • High Quality User Adjustable Hobbs Switch: Preset @ 5psi, User Adjustable from 3psi to 7psi
  • Adjustable Voltage Ramp In / Ramp Out • Choose a Time Ramp or from a monitored 0-5v sensor
  • Green Status LED: Know at a glance what the unit is doing.  
  • Blinking LED = Boosting Voltage
  • Optional Remote Voltage Control Knob: Over-Ride the voltage output when the knob is connected (PM-2999)
  • Enable Voltage Boosting with Ground or via a monitored 0-5v external sensor.

Each PowerMAX v2 Kit Contains: 44 Amp PowerMAX V2 Voltage Booster, Wiring Harness, Installation Kit, Set of Instructions

 
Installation Kit Contains: 1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi), 1 - Fitting 1/8npt Female to 3/16" Male Barb, 1 - Vacuum Tee 3/16" x 3/16" x 3/16", 1 - Vacuum Tee 1/4" x 1/4" x 3/16", 1 - Vacuum Tee 3/8" x 3/8" x 3/16", 1 Foot of 5/32" vacuum hose, 1 - 30amp mini-fuse, solder, 2 - 10/12gauge Heat Shrink Butt Splices, 2 - #8 stud 18/22 gauge wire Heat Shrink Ring Terminal, 1 - 10 gauge Heat Shrink Ring Terminal, 6 - Zip Ties, 6 - Self drilling hex screws, mini screw-driver
Download the Product Installation Instructions
Download the Product Technical Information Sheet
Download the JMS Product Catalog
 
SparkMAX V1 Installation on a 2011-2014 Mustang GT:
 
 
Using SparkMAX to solve spark blow-out:
 
 

Product Reviews

Write your own product review

  1. Finally a 9.99 ET using SparkMAX!

    Posted by Steven on 14th Oct 2014

    Hi Guys!

    We have finally reach 9.99 ET quarter mille with the 2001 2 valve GT with a vortech @ 16 psi boost.

    With the sparkmax at 21 volt and plug gap at 36.
    We have gained almost .40 second, .20 with the addition of SparkMAX.

    I really appreciate you and your team.

    Thank you very much.

    Steven Robitaille
    Mustang Revolution


Find Similar Products by Category