Loading... Please wait...
  •  PowerMAX V2 - FuelMAX 22 Volt/44 AMP Voltage Booster (40 amp fuse)

 Increase the output of your fuel pump by up to 85%!!

 PowerMAX Version 2 includes a new case, additional output & more features!

 Simple installation - PowerMAX splices into your existing fuel pump +12V DC feed wire.

 Compatible with all fuel pumps.

 Avoid the hassle of replacing your stock pump and install a JMS PowerMAX!
  • PowerMAX Version 2 with the six position control cable connected.
  • Six Wire Control Cable • 22 feet in length

When you connect the Grey Wire to the Black wire the unit is enabled and will boost the output voltage.
Or if you connect the Grey Wire to ground the unit is enabled and will boost the output voltage.

Also: The red wire is used to monitor an external 0-5v sensor (black single connector) and if this voltage is above the value set by the pot the unit is enabled and will boost the output voltage.
  • Far Left -> Six Wire Control Connector

Dip Switches -> Used to program the device

Two Adjustment POT's (Used to set the device output and 0-5v trigger point)

Green LED (Far Right) • When the LED is blinking the unit is BOOSTING the voltage output
  • PowerMAX V2 - Five main connection wires. Red - Dual Wires • +12V Input (Fused 40 Amps) Black - Single Wire • Ground White - Dual Wires • Boosted Output
  • Included - High Quality Hobbs Switch with screw terminals (User Adjustable 3-7psi)

Preset @ 5psi

Turn Clockwise to INCREASE the pressure setting.
  • Installation kit for PowerMAX V2 • Single Input/Output • Universal Splice In
  • PowerMAX V2 - 40 AMP Fuse & 10 gauge automotive rated wiring
  • Optional: Remote Mounted Voltage Control Knob  (Approximately 1" x 1" x 1")

Part Number: PM-2999

Over-Rides and adjusts the output voltage when the device is boosting voltage.
  • Optional: Remote Mounted Voltage Control Knob  (Approximately 1" x 1" x 1")

Part Number: PM-2999

Over-Rides and adjusts the output voltage when the device is boosting voltage.
  • Optional: Remote Mounted Voltage Control Knob  (Approximately 1" x 1" x 1")

Part Number: PM-2999

Over-Rides and adjusts the output voltage when the device is boosting voltage.
  • 12v 70 Amp Power Feed Upgrade ( 2011-2012 models Only )
  • 12v 70 Amp Power Feed Upgrade ( 2011-2012 models Only )

PowerMAX V2 • FuelMAX • Plug & Play (Dual) Fuel Pump Voltage Booster (Shelby 2013 - 2014)

$599.00
SKU:
P2020PPS13
Brand:
JMS
Weight:
5.00 LBS
Availability:
Usually ships within one business day.
Shipping:
Calculated at checkout

Choose Your Options

Quantity:

Product Description

 
PowerMAX v2 • FuelMAX 22 Volt/44 AMP • Dual Plug & Play Voltage Booster
 

Increase the output of ANY fuel pump by up to 85%!!

 

Plug & Play for the 2013 - 2014 Shelby GT500

 

Monitors & Enables Voltage Boosting via Accelerator Pedal Position.

 

Easily support over 1000rwhp with the stock twin Shelby pumps!


Click to watch PowerMAX make 1000+hp on a 2012 Boss Mustang!!


Why replace your fuel pump when you can reliably increase it's output with PowerMAX?

Use PowerMAX v2 to quickly and easily increase your stock fuel pumps output!


PowerMAX Version 2 upgrades include: New Case, Higher Output & More Features!!


PM-2020 boost & regulates voltage to 14.4v all of the time (Typically used on Ford/Imports)

 

 
  • Simple installation: PowerMAX plugs directly into your existing fuel pump driver(s) +12V DC feed wire.
  • Compatible with all 12V or 16V battery systems
  • Works on all 2013 - 2014 Ford Mustang Shelby GT-500.
  • Designed to be enabled via the Accelerator Pedal Position Sensor (Plug & Play)
  • Adjustable Voltage Ramp In / Ramp Out • Choose a Time Ramp or from a monitored 0-5v sensor: Eliminate fuel pressure spikes!!
  • Green Status LED: Know at a glance what the unit is doing.  
  • Blinking LED = Boosting Voltage
  • Optional Remote Voltage Control Knob: Over-Ride the voltage output when the knob is connected (PM-2999)
  • Enable Voltage Boosting with Ground or via a monitored 0-5v external sensor.

Each PowerMAX v2 Kit Contains: 44 Amp PowerMAX V2 Voltage Booster, Dual Plug & Play Wiring Harness, Pedal Harness, Installation Kit, Set of Instructions

 
Installation Kit Contains: 1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi), 1 - Fitting 1/8npt Female to 3/16" Male Barb, 1 - Vacuum Tee 3/16" x 3/16" x 3/16", 1 - Vacuum Tee 1/4" x 1/4" x 3/16", 1 - Vacuum Tee 3/8" x 3/8" x 3/16", 1 Foot of 5/32" vacuum hose, 2 - 30amp mini-fuse, solder, 2 - 10/12gauge Heat Shrink Butt Splices, 2 - #8 stud 18/22 gauge wire Heat Shrink Ring Terminal, 1 - 10 gauge Heat Shrink Ring Terminal, 6- Zip Ties, 6 - Self drilling hex screws, mini screw-driver
Download the Product Installation Instructions
Download the Product Technical Information Sheet
Download the JMS Product Catalog
 
Installation Video V1 • V2 Videos coming soon:
 
 
V1 • Comparison Video:
 
 

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review