Loading... Please wait...
  •  PowerMAX V2 - FuelMAX 22 Volt/44 AMP Voltage Booster (40 amp fuse)

 Increase the output of your fuel pump by up to 85%!!

 PowerMAX Version 2 includes a new case, additional output & more features!

 Simple installation - PowerMAX splices into your existing fuel pump +12V DC feed wire.

 Compatible with all fuel pumps.

 Avoid the hassle of replacing your stock pump and install a JMS PowerMAX!
  • PowerMAX Version 2 with the six position control cable connected.
  • Six Wire Control Cable • 22 feet in length

When you connect the Grey Wire to the Black wire the unit is enabled and will boost the output voltage.
Or if you connect the Grey Wire to ground the unit is enabled and will boost the output voltage.

Also: The red wire is used to monitor an external 0-5v sensor (black single connector) and if this voltage is above the value set by the pot the unit is enabled and will boost the output voltage.
  • PowerMAX V2 - Three main connection wires.

Red • +12V Input (Fused 40 Amps)
Black • Ground
White • Boosted Output
  • Far Left -> Six Wire Control Connector

Dip Switches -> Used to program the device

Two Adjustment POT's (Used to set the device output and 0-5v trigger point)

Green LED (Far Right) • When the LED is blinking the unit is BOOSTING the voltage output
  • Included - High Quality Hobbs Switch with screw terminals (User Adjustable 3-7psi)

Preset @ 5psi

Turn Clockwise to INCREASE the pressure setting.
  • Installation kit for PowerMAX V2 • Single Input/Output • Universal Splice In
  • PowerMAX V2 - 40 AMP Fuse & 10 gauge automotive rated wiring
  • Optional: Remote Mounted Voltage Control Knob  (Approximately 1" x 1" x 1")

Part Number: PM-2999

Over-Rides and adjusts the output voltage when the device is boosting voltage.
  • Optional: Remote Mounted Voltage Control Knob  (Approximately 1" x 1" x 1")

Part Number: PM-2999

Over-Rides and adjusts the output voltage when the device is boosting voltage.
  • Optional: Remote Mounted Voltage Control Knob  (Approximately 1" x 1" x 1")

Part Number: PM-2999

Over-Rides and adjusts the output voltage when the device is boosting voltage.

PowerMAX V2 • FuelMAX (GM Version 2) • Universal (Single) Splice In Fuel Pump Voltage Booster (2016-2017 Camaro)

$409.00
SKU:
P2000GMP2
Brand:
JMS
Weight:
5.00 LBS
Availability:
Usually ships within one business day.
Shipping:
Calculated at checkout

Choose Your Options

Quantity:

Product Description

 
PowerMAX v2 • FuelMAX 22 Volt/44 AMP • Universal Splice-In Voltage Booster
GM Version 

Increase the output of ANY fuel pump by up to 85%!!

Why replace your fuel pump when you can reliably increase it's output with PowerMAX?

Use PowerMAX v2 to quickly and easily increase your stock fuel pumps output!

PowerMAX Version 2 upgrades include: New Case, Higher Output & More Features!

P2000GMP2 is used on 2016-2017 Camaro with constant power applied to the fuel pump driver module.

Support over 800hp on your GM with the stock pump!

 

 
  • Simple installation: PowerMAX splices into your existing fuel pump +12V DC feed wire.  Designed to activate via the accelerator pedal position sensor.
  • Compatible with all 12V or 16V battery systems
  • This version is designed specifically for 2016-2017 GM Cars: Chevy Camaro.
  • High Quality User Adjustable Hobbs Switch: Preset @ 5psi, User Adjustable from 3psi to 7psi
  • Adjustable Voltage Ramp In / Ramp Out • Choose a Time Ramp or from a monitored 0-5v sensor: Eliminate fuel pressure spikes!!
  • Green Status LED: Know at a glance what the unit is doing.  
  • Blinking LED = Boosting Voltage
  • Optional Remote Voltage Control Knob: Over-Ride the voltage output when the knob is connected (PM-2999)
  • Enable Voltage Boosting with Ground or via a monitored 0-5v external sensor.

Each PowerMAX v2 Kit Contains: 44 Amp PowerMAX V2 Voltage Booster, Wiring Harness, Installation Kit, Set of Instructions

 
Installation Kit Contains: 1 - Accelerator Pedal Activation Harness, 1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi), 1 - Fitting 1/8npt Female to 3/16" Male Barb, 1 - Vacuum Tee 3/16" x 3/16" x 3/16", 1 - Vacuum Tee 1/4" x 1/4" x 3/16", 1 - Vacuum Tee 3/8" x 3/8" x 3/16", 1 Foot of 5/32" vacuum hose, 1 - 30amp mini-fuse, solder, 2 - 10/12gauge Heat Shrink Butt Splices, 2 - #8 stud 18/22 gauge wire Heat Shrink Ring Terminal, 1 - 10 gauge Heat Shrink Ring Terminal, 6 - Zip Ties, 6 - Self drilling hex screws, mini screw-driver
Download the Product Installation Instructions
Download the Product Technical Information Sheet
Download the JMS Product Catalog
 
Installation Video V1 • V2 Videos coming soon:
 
 
V1 • Comparison Video:
 
 

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review