Loading... Please wait...

EGT Kits - Plug and Play for SCT Handhelds

Sort by:

The JMS Exhaust Gas Temperature Sensor Kit (9617-B) works with all SCT brand tuners and utilizes the standard FireWire connector found on their devices. It sends a 0-5 volt EGT signal directly to the SCT device and displays exhaust gas temperature readings on the monitor screen.

 

Also offered, is a generic EGT Kit (9617-A) that is compatible with other brands of tuners and monitors including; Edge/Superchips, Bully Dog, H&S, and most others that allow for the monitoring of external sensors. This kit can be powered by either 5V or 12V, and can easily be spliced into the manufacturer's external sensor monitoring cable.

 

JMSExhaust Gas Temperature Sensor Kits feature a high-quality EGT probe with dual-ferrule compression fitting and common 1/8" NPT thread. The probe's cable is RFI shielded with industry-standard type-K connector, and capable of withstanding temperatures as high as 1,650 degrees.

 

Also included is a signal conditioning device that converts the sensor's output signal from millivolts to a common 0-5 volt output. The Exhaust Gas Temperature Sensor Kit (9617-B) utilizes an attached cable assembly that will plug directly into any current SCT tuner and monitor. The generic EGT Kit (9617-A) can be easily spliced into any common accessory cable. Consumers can also purchase a separate complete EGT installation kit that includes the correct drill bit, NPT tap, and grease.

 

Exhaust Gas Temperature is a critical element in diesel performance, especially under towing conditions. EGT readings are essential to eliminating engine failures that result from heat. Temperature can vary widely depending upon the amount of load the engine is under, and the type of tuning used in the vehicle ECU. Monitoring your engines exhaust temperature can tell you how safe your tuning is, in every type of driving condition, and it can alert you of potential heat issues. An EGT reading is an absolute necessity on modified diesel engines.