Loading... Please wait...
  • 1/8th NPT Tap
  • 5/16" Drill Bit
  • Grease

JMS EGT Installation Kit

$17.99
SKU:
JMS-EGT-INSTALL
Brand:
JMS
Weight:
1.00 LBS
Shipping:
Calculated at checkout
Quantity:

Product Description

Installation kit for the JMS 9617A/B EGT Kit.

 

Includes:  

1) 5/16" Drill Bit

1) 1/8th NPT Tap

1) Packet of Grease

 

Directions:  

Drill a 5/16" hole into the manifold.  

Pack the 1/8th NPT Tap with grease.  

Tap the hole, paying attention to remove all metal shavings.

Screw the threaded EGT Hex End into the manifold.

Insert the EGT probe and ferrule, tighten.

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Product Videos

JMS EGT KIT 9617 Install • SCT X3 / SF3 PN: 3000, 3015, 3400 or 3416 (02:30)
JMS EGT KIT 9617 Install • SCT X3 / SF3 PN: 3000, 3015, 3400 or 3416JMS Chip & Performance recently released their Exhaust Gas Temperature Sensor Kit for SCT brand diesel truck tuners and monitors. The new plug and play EGT Kits are complete pre-engineered solutions designed to plug and play with all SCT tuning devices, and require no additional modifications. The JMS Exhaust Gas Temperature Sensor Kit (9617-B) works with all SCT brand tuners and utilizes the standard FireWire connector found on their devices. It sends a 0-5 volt EGT signal directly to the SCT device and displays exhaust gas temperature readings on the monitor screen. Also offered, is a generic EGT Kit (9617-A) that is compatible with other brands of tuners and monitors including; Edge/Superchips, Bully Dog, H&S, and most others that allow for the monitoring of external sensors. This kit can be powered by either 5V or 12V, and can easily be spliced into the manufacturer's external sensor monitoring cable.JMS Exhaust Gas Temperature Sensor Kits feature a high-quality EGT probe with dual-ferrule compression fitting and common 1/8" NPT thread. The probe's cable is RFI shielded with industry-standard type-K connector, and capable of withstanding temperatures as high as 1,650 degrees. Also included is a signal conditioning device that converts the sensor's output signal from millivolts to a common 0-5 volt output. The Exhaust Gas Temperature Sensor Kit (9617-B) utilizes an attached cable assembly that will plug directly into any current SCT tuner and monitor. The generic EGT Kit (9617-A) can be easily spliced into any common accessory cable.Exhaust Gas Temperature is a critical element in diesel performance, especially under towing conditions. EGT readings are essential to eliminating engine failures that result from heat. Temperature can vary widely depending upon the amount of load the engine is under, and the type of tuning used in the vehicle ECU. Monitoring your engines exhaust temperature can tell you how safe your tuning is, in every type of driving condition, and it can alert you of potential heat issues. An EGT reading is an absolute necessity on modified diesel engines.JMS Exhaust Gas Temperature Kits for diesel truck applications, along with other revolutionary fuel injection and electronics products are available through authorized JMS Chip & Performance Dealers, online at www.JMSchip.com or by calling JMS direct at (601) 766-9424. At JMS we make fast cars even faster!www.jmschip.com 601-766-9424Find JMS on Facebook at:http://www.facebook.com/jmschipsJMS on YouTube: http://www.youtube.com/jmschipFollow JMS on Twitter:http://twitter.com/jmschip
  • JMS EGT KIT 9617 Install • SCT X3 / SF3 PN: 3000, 3015, 3400 or 3416
    JMS EGT KIT 9617 Install • SCT X3 / SF3 PN: 3000, 3015, 3400 ...
  • JMS EGT KIT 9617 Install • SCT LiveWire TS PN: 5015 or 5416
    JMS EGT KIT 9617 Install • SCT LiveWire TS PN: 5015 or 5416JMS...
  • JMS EGT KIT 9617 Troubleshooting • Livewire TS • X3 / SF3 • Livewire 9600
    JMS EGT KIT 9617 Troubleshooting • Livewire TS • X3 / SF3 • Li...
  • JMS EGT KIT 9617 • Temperature Test using SCT X3 / SF3
    JMS EGT KIT 9617 • Temperature Test using SCT X3 / SF3 JMS Chi...

Find Similar Products by Category